A Floor Tile Removal Tool Is a Convenient Home Improvement Tool

When it comes time to rip out old tile or install new flooring, you’ll need to have the right tools to do so. In particular, a floor tile removal tool can be helpful in preparing the surface for new flooring.

This is a larger handheld breaker that is used for breaking apart concrete and some types of tiles. It may not be ideal in small spaces like bathrooms but can work well if you have ample room to swing it.

Drill and Tile Drill Bit

The drill (with the proper bit) is arguably one of the most important tools for removing tile. Without a specialized bit, drilling into tile can easily damage both the drill and the wall surface.

To prevent this, a hammer drill with an SDS-plus or SDS-max chisel bit should be used. Start by finding a weak spot in the tiling, such as a cracked tile or an exposed section of underlayment.

Adhere masking tape to the wall where you’ll be drilling. This makes it easier to accurately mark the hole location. Once you’ve marked the area, begin drilling, slowly at first. You can speed up the drilling once the drill bit is able to cut through the tile, which you’ll know when the tone of the drill changes.

Concrete Breaker Tool

A concrete breaker is an electric power tool for breaking up heavy, hardened building materials such as bricks and tile. The breaker has a piston that hammers on the surface of the material to break it apart. The tool has different modes of operation to suit specific tasks.

For example, you can use a rotary breaker that has three operational modes to chip away at tiles. It’s also possible to rent a demolition breaker that has chiseling-only mode for removing masonry and concrete.

When using a rotary or demolition breaker, find a good starting point by looking for a loose piece of tile or grout. Push the breaker chisel beneath this location at an angle and hit it with a mallet or sledge hammer until the tile is broken free from the floor.

Chisel Breaker Attachment

The chisel breaker attachment for your power drill is a convenient way to save time and effort in the home renovation process. This is because it allows you to quickly suck up broken tiles and debris without having to manually remove them with a hammer.

To use it, find a starting point where there is loose tile or a crack in the floor and place the breaker tip on your power drill. Once you hit it with the hammer, it will break up the tiles and transform them into a dust that can be easily removed.

Continue the process by switching between hammering and using the chisel tool until all the tiles are removed. Then use the floor tile scraper to remove the smaller pieces of adhesive that are left behind.

Shovel

A shovel is a hand tool that consists of a broad blade fixed to a medium-length handle. Shovels may have one or two “ears” that project forward from the upward-turned edge of the front part of the blade. The ears prevent the shovel from cutting cleanly into a corner, making it difficult to pick up debris and move it away from a work area.

Most modern floor tile is set into a plywood or cement-board underlayment, rather than directly on to the substrate as was often done in older homes. Depending on the kind of subfloor you have, this underlayment might be easy to remove by tapping with your hammer and chisel. Once you’ve cleared the tile, use your shovel to scoop up larger chunks and relocate them to buckets for disposal.

Floor Tile Scraper

If tiles don’t come up easily with the hammer drill or chisel attachment or even basic hand tools, you can rent or buy a floor scraper. This is a push-along machine that has a blade that scrapes off the old tile and adhesive, leaving you with a clean base to install your new flooring.

After you’ve used the floor scraper and a hammer or chisel to chip away the remaining pieces of tile, use a pry bar or putty knife to work up any lingering adhesive, thin set, or pieces of underlayment. When you’re finished, sweep or vacuum the area to remove any smaller pieces and put them in heavy-duty trash bags for disposal. Be sure to wear protective gear as you work, as breaking tiles can create dangerous dust that should not be breathed in and can cut skin.

from Tile Removal Newcastle https://ift.tt/y04Q5El
via IFTTT