Choosing the Right Tile Floor Removal Tool

When removing tile floors, it’s important to prepare your home and choose the right tools. This will prevent damage and make the project faster and easier for you to complete.

Start by using a flat pry bar and sledgehammer to break the tiles in one place. Then, use a floor scraper to remove the rest.

1. Hammer

While you can use a variety of hand tools to remove tile floor, like pry bars and hammers or even a floor scraper, power tools like rotary hammers are more efficient. They also require less expertise to operate than jackhammers and are far safer for homeowners, do-it-yourselfers and beginners.

Start by breaking a few tiles with the hammer to get a feel for the work ahead of you. Once the initial breakage is complete, switch over to your rotary hammer bit holder and insert a flat chisel blade to continue separating the tiles from the adhesive underneath. As you do this, be sure to wear long-sleeved clothing and gloves to protect yourself from cuts or burns. It is also a good idea to use a dust mask.

2. Shovel

A shovel is a hand tool that features a broad blade and a handle. Its primary function is to scoop up, carry, and move materials such as soil, coal, snow, and debris.

The shovel can be used to slide under loosened tiles and separate them from the adhesive on their bottoms. This can make the job much faster than chiseling away each tile by hand with a hammer.

When using a shovel to remove tile floor, be sure to wear protective gear such as gloves, goggles, and a mask. The tile can be sharp, and the project generates a lot of dust that can irritate the lungs. Also, cover furniture and other items with plastic sheets to prevent damage. For cleanup, a broom and wet/dry vacuum should be available to remove the debris and any leftover dust.

3. Chisel

The chisel is a key tool for breaking apart tile and mortar. Place the chisel at the edge of the tile and gently hammer away to break it into manageable pieces. Continue to do this until the entire tile is broken and placed in a bucket. Make sure to have enough room to swing the hammer without damaging the floor or causing collateral damage.

Depending on the quality of work by your original installer, some tiles will pop up right off while others may require a bit more effort. If you’re removing tile in large quantities, try using an electric jack hammer as it will go faster than trying to do it by hand. You can even rent these tools at home improvement stores.

4. Demolition Folk

Like a pry bar, but better, Demolition Folk is a sturdy hand tool for breaking up tiles and other demolition projects. You can also use it to remove moldings, trim and doors that will interfere with tile removal. Make sure to cover heating ducts and open doorways with plastic sheets to control dust. Tile removal generates a lot of dust particles that can travel throughout the house, so it is important to protect yourself from this.

When you’re remodeling your Las Vegas home or business, the best tile flooring contractor is Tile Ram. They can help you with your project from start to finish, while making the job safe, efficient and complies with regulations.

5. DustRam

With DustRam, contractors can remove tile floors in homes that are occupied. This eliminates the need to temporarily move the family out of their home and allows them to stay in their kitchen, living room, bedroom, etc. It also eliminates the need to run a temporary air conditioner which can damage the house.

The patented system captures silica dust at the point of creation. When properly used, DustRam contractors remain 50 times below OSHA’s permissible exposure limit.

The system preserves the integrity of concrete, prevents costly dust contamination of air ducts and heating and cooling components, saves on professional cleaning costs and allows for faster floor installation. It is also proven to leave concrete subfloors better prepared for the next floor. It’s time for a new standard in flooring removal.



from Tile Removal Newcastle https://ift.tt/g0JOT5K
via IFTTT

Comments

Post a Comment

Popular posts from this blog

How Much Does Asbestos Ceiling Tile Removal Cost?

Image
Asbestos floor tiles are often found in homes built before the 1980s. Disturbing them can release toxic asbestos fibers, putting the health of residents at risk. It’s important to leave this work to a licensed asbestos professional. They will inspect the tiles and take samples for testing. They will also recommend whether encapsulation or removal is necessary. Encapsulation is a cheaper solution but is not permanent. Labor The amount of work involved in a specific asbestos removal project is the biggest factor that determines its price. The process is dangerous and requires professional training, licensing, and special equipment to safely remove the material. Licensed professionals wear disposable suits, masks, and rubber gloves and use a HEPA vacuum to keep contaminants from spreading around the area. They also have to set up and prepare the area before removing asbestos to prevent contamination. This part of the project accounts for 60 to 70 percent of the total cost. Non-friabl...
Read more

Tile Flooring Removal Tips

Image
If you’re removing tile floors in your home as part of a remodeling project, there are some things you should keep in mind. The job can be messy, and it will take time to do properly. The first step is to find a spot where the tile doesn’t extend into another room or other semi-permanent fixture. Then, start by breaking the tiles into pieces. Site Preparation If you’re ready to take on tile flooring removal, clear away fixtures that can’t be removed — such as a toilet or vanity. You should also cover items you can’t move to protect them from dust and debris. Finally, seal any vents in the room with painters’ tape and plastic wrap to prevent air circulation from getting clogged with bits of broken tile and adhesive. If your tile was installed directly to the floor, rather than a layer of underlayment, you’ll need to rip that up too. To do this, find a spot in the room where the tile doesn’t continue into the next room or doorway. This is where you can slip a chisel underneath and be...
Read more

Tile Removal Machine Rental – Selecting the Right Tools

Image
Getting Started A tile removal machine rental is a great way to make this job go much smoother than it would otherwise. This type of equipment is particularly useful for large jobs that have a tight timeframe. The right tools are also important for the success of this task. Start with a hammer and chisel for breaking apart the tiles before switching to a pry bar when you’re getting close to walls or cabinets. You’ll want to also have a floor scraper, an air hammer with a breaker blade, and a vacuum or shop vac. You’ll also need to wear safety glasses and hearing protection if you’re using power equipment. Preparation Before you start removing the tile, clear the area by moving any freestanding items like a towel rack in the bathroom or a table in the kitchen. You should also cover any fixtures or items you can’t move to keep them from getting covered in dust as you work. Additionally, prepare your tools by obtaining a pry bar and a floor scraper, as well as a vacuum or shop vac, a ...
Read more